Drain Tile 101: How do you know if you need drain tile? Answer: If you have Water issues in your basement is a good hint!
Types of Drain Tiles Systems
A drain tile system, also called a French Drain, is designed to collect and redirect water seepage away from the house.
Drain tiles can be installed either on the interior perimeter of the foundation or along the exterior as a house is being built. Interior drain tile is the preferred method because it is less invasive and much more affordable.
Drain tiles basically consist of a perforated pipe (typically a PVC pipe with weep holes along one side) set in a trench and covered with gravel. We then cover the pipe with a nylon filter sock to prevent the pipe from filling with debris. The water that enters the pipe is then redirected to the sump pump or away from the foundation by gravity flow.
Most drain tile systems are designed from the same concept. The differences come in the materials, shape of the pipe, and placement.
Differences in Material and Shape
Before the 1950s, drain tiles were made of a red or orange clay material. The original drain tiles had no holes in the pipe, but instead the sections were laid with a quarter-inch space between them to let in water. Now, drain tiles are made with plastic or PVC perforated pipes.
Manufacturers have designed drain tile pipes in various shapes from round, rectangle, and square to oblong variations or pipes vents with multiple openings for increased flow.
Differences in Placement
While the main difference in placement is outside versus inside the basement, there are mainly three different placement options for interior drain tile systems.
Interior Drain Tiles
Interior drain tile systems can be placed either above the concrete slab, within the slab edge or under the concrete slab.
The most common placement for drain tile systems in existing homes is below the concrete slab. To install this option, a portion of the basement floor is removed (approximately 12-24 inches from the concrete floor). Then, a trench is dug and the pipe is set in place and covered with washed gravel.
We then place hydro channel on top of the footing to direct the water into the perforated pipe and then lay pipe to fall towards the sump pit.
Usually contractors install a waterproofing product to direct water that enters through the foundation wall to the drain tile. The concrete is then replaced.
Exterior Drain Tiles
Exterior drain tiles, more commonly known as footing drains, are usually installed during construction. The drain tile around the outside of a foundation acts as a piping system to collect and redirect subsurface water that moves down into and through the soil.
Installing an exterior drainage system at an existing building is the most costly, but also the most effective water control approach.
This requires digging up the area around the foundation and rebuilding it similar to a new house installation. It also requires digging up shrubs and other obstacles around the house.
Exterior drain tiles can be placed beside or on top of the footing. All exterior drainage systems must drain to a sump that can be pumped out.
We Offer Services in St. Charles, Warren, Lincoln and St. Louis Counties!